next update! weer in het engels...
Dash is really coming together. Almost all wiring is ready to be connected.
EGT sensor fitted and wiring done.
Second o2 sensor bung welded in my downpipe.
Bought a narrowband sensor with 4 wires. Without the connector. When I was underneath my car yesterday found the origional connector for my O2 sensor !
Got some realy cheap LED strips ment for day running lights. Fitted them on my rollcage as interior lights. 8-)
Also Spray painted my digital rev and shiftlight black. Origionaly I was planning on mounting it ontop of my dash but found a very good spot next to my new Innovative AF guage.
paar dagen en heel veel uur later:
mmmmmm..
bummer... Well it didn't catch fire.. but I have no dashboard lights...
The guages I installed work fine but the rest , lights and dash dont work.
.. sorting things out and really hope to fire up the engine after the weekend..
this is how it looks in the dark..
https://youtu.be/Mz_dua-qakkthis is what i'm doing now.. took the whole dash apart so I can atleast see were the wires go and measure if they have any voltage at all. the wires look horrible because of the sunbaked "chocolat" over it but are actually still good.
will re-tape them when they go back in.
dit weekend:
Its not running yet...
also need some help identifying a connector so please read on..
I have taken my intakemanifold off and my whole engine wiringloom apart to sort out the O2 sensor wiring.
was a pain but just had to do it to make sure.
Also had to remove buth fuse boxes and check every wire.
Found two things,
I grounded a black wire that gives out 8 volts. dont know what its from, can't find it in any wiring diagram.
My underdash fusebox didn't have a ground connection. Strange as I have only removed things I don't use anymore like power windows and central locking, but nothing else.
I have connected a good ground source to the fusebox so my dash gets a ground source now.
Fitted the dashboard and all guages. it finaly works
check this link:
https://youtu.be/AZuZiO7maOwI have welded the fia bolt plate for my crotchstrap and fitted my seat:
Wrapped my downpipe, top part in black wrap (damn thats a messy job) so the part you can see doesnt turn brown . might redo it in titanium DEI wrap someday. wanted to wrap past my oilpan so I don't fry it.
Now the bad news... My brand new Yonaka race radiator is leaking. Filled my radiator with the waterless coolant and it started dripping. first I thought it was a hose but its a leak somewhere in th core, nog even were its damaged.
ordered a new one straight away and going to have this fixed.
also my hood damper snapped. I have fitted them the wrong way..
Then I nearly cut the top part of my finger off by a sharp bit of metal.... right hand index finger so I can't do sh#t at the moment... I have lots to do when I'm waiting for my radiator to come in so will have to get some help and improvise.
Dit was het weer even.. gaat de goeie kant op al moet ik nog veel dingen checken en heb nogsteeds wat draden over.
Ben afgelopen week wel 30 uur bezig geweest met alles weer uitelkaar halen en door meten.. hoop dat dat niet meer hoeft.